rank-math domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/u561405614/domains/meriiti.com/public_html/wp-includes/functions.php on line 6114updraftplus domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/u561405614/domains/meriiti.com/public_html/wp-includes/functions.php on line 6114
These questions belong to ITI Trade theory which has been asked in various government exams. After solving, Mention your marks in the comment section
For More such questions & Discussions, Join Our Telegram Channel
0 of 146 questions completed
Questions:
To start this test, press the button below (Start Quiz)
After marking the option of each question, press the check button and know the correct answer.
1 mark will be given for every correct answer, there is no negative marking
If you have any doubt in the question or answer, join our Telegram Group (Click)
After finishing the test, definitely tell us the number of correct answers in the comment, by this we will know how we can improve our questions further.
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
0 of 146 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
| Average score |
|
| Your score |
|
Name the part of file marked as x S1M2-21
What is the use of a try square? S1M2-22
Which marking media is poisonous? S1M2-23
Which part of universal surface gauge holds the scriber? S1M2-24
What is the name of the vice? S1M2-25
A new hacksaw blade after a few stroke,becomes loose because of? S1M2-26
Why breakage of teeth occur easily while sawing of thin walled work pieces and the start of cut? S1M2-27
Which chisel used for squaring materials at the corners, joints? S1M2-28
Name the part of a hammer marked as x S1M2-29
Which angle is represented by the symbol g on the cutting chisel? S1M2-30
Name the property of metal which can be drawn into wire without rupture S1M2-31
What is the spindle movement of one division of thimble with spindle thread of 0.5mm pitch? S1M2-32
What is the reading of a vernier caliper? S1M2-33
What is the reading of vernier bevel protractor? S1M2-34
What is the use of feeler gauge? S1M2-35
Read the measurement in the dial caliper S1M2-36
What operation is carried out in a gang drilling machine? S1M2-37
Which is an integral part of the stock in vernier bevel protractor? S1M2-38
Name the part marked as x of the file S1M2-39
Which file is used to make the job close to the finishing size? S1M2-40
Which file has the parallel edges throughout the length? S1M2-41
What is the material to manfacture bench vice? S1M2-42
Which marking media provide clear lines on machine finished surfaces? S1M2-43
What is the purpose of slots provided in the slotted angle plate? S1M2-44
Which caliper is used to mark the centre of round bar? S1M2-45
Name the part marked as x S1M2-46
Name the angular measuring instrument. S1M2-47
Which is used for filling narrow grooves and angles above $$10^\circ$$? S1M2-48
Name the defect that causes the metal chips to clog between the teeth of file? S1M2-49
Which chisel is used for cutting oil grooves? S1M2-50
Name the file S1M2-51
What is the name of vice? S1M2-52
Which grinding machine is used for heavy duty work? S1M2-53
Which chisel is used for separating materials after chain drilling? S1M2-54
Which file is used for sharpening the teeth of wood working saws? S1M2-55
Where will be the weight of the hammer stamped? S1M2-56
What will be the effect if the clearance angle of chisel is less than recommended angle while chipping? S1M2-57
Name the property of metal to resist the effect of tensile forces without rupture. S1M2-58
Name the part marked as x S1M2-59
What is the accuracy of metric outside micrometer? S1M2-60
Name the part marked as x S1M2-61
Which type of taper is provided in the drill shank? S1M2-62
Which is used to remove drills and sockets from the machine spindle? S1M2-63
Name the tap wrench used in the restricted place. S1M2-64
In the ISO metric thread, calculate the tap drill size for M 10 x 1.5 thread S1M2-65
What is the unit of feed in drilling operation? S1M2-66
Name the part marked as x in vernier caliper. S1M2-67
What is the accuracy of protractor head in combination set? S1M2-68
What is the accuracy of a try square? S1M2-69
Which punch is used for witness marks? S1M2-70
What is the name of the caliper having one leg with an adjustable divider point and other leg is bent? S1M2-71
What is the name of part marked as x in surface gauge? S1M2-72
What is the name of part marked as x in combination set? S1M2-73
Which type of datum is followed? S1M2-74
What is the name of parallel block? S1M2-75
Which material is used to manufacture grade A V blocks? S1M2-76
Which chisel is used for removing materials on the corners of the keyways? S1M2-77
Which file is having rows of teeth cut in one direction? S1M2-78
Which file is used for filing wood and leather? S1M2-79
Why the cutting faces of files are slightly bellied on length wise? S1M2-80
Which pitch of blade is used for cutting bronze, brass and cast iron? S1M2-81
What happen if the clearance angle of chisel is too high? S1M2-82
Which type of hammer is used for riveting purpose? S1M2-83
What is the unit of cutting speed in drilling operation? S1M2-84
What is the name of part marked as x in drill? S1M2-85
What is the name of part marked as x in drilling machine? S1M2-86
What is the minor diameter of thread? S1M2-87
What is the name of the part marked as X ? S1M2-88
What is the reading of the outside micrometer 50 to 75mm? S1M2-89
What is the name of the part marked as X ? S1M2-90
What is the name of the vice? S1M2-91
What is the name of the part marked as X ? S1M2-92
What is the name of operation? S1M2-93
Which marking media is applied to rough forgings and castings? S1M2-94
Which is used to finish the resharpened divider point? S1M2-95
What is the use of bevel protractor? S1M2-96
Name the file shown. S1M2-97
Which vice is used for holding hollow cylindrical jobs? S1M2-98
What is the pitch of hacksaw blade used to cut conduit and other thin tubes? S1M2-99
Which metal cutting saw is used for cutting different profiles? S1M2-100
What is the reason for scratches produced on filed surface? S1M2-101
What is the name of chisel? S1M2-102
Why slight convexity is given on the face of hammer? S1M2-103
What is the name of hammer? S1M2-104
What is the name of angle between the axis of chisel and job surface while chipping? S1M2-105
What is the property of metal that permits no permanent distortion before breaking? S1M2-106
Name the part marked as x in depth micrometre. S1M2-107
Why the hand taps are chamfered at the lead? S1M2-108
What is the name of drilling machine? S1M2-109
What is the reading of an outside micrometer (British)? S1M2-110
What is the accuracy of Vernier bevel protractor? S1M2-111
What is the reading of vernier caliper? S1M2-112
Why surface plates are made of stress relieved good quality cast iron? S1M2-113
What is the main advantage of adjustable parallel block? S1M2-114
Which part of universal surface gauge is used to set scriber at required position exactly? S1M2-115
Fine adjustment screw S1M2-116
What is the name of V block? S1M2-117
What is the name of the part marked as x in combination set? S1M2-118
Which caliper is used to find the centre of round bars? S1M2-119
What is the name of angle marked a in chisel? S1M2-120
Which chisel is used for cutting curved grooves? S1M2-121
What is the weight of hammer used for marking purpose? S1M2-122
What is the effect of improper method of diagonal filing? S1M2-123
Which chisel is used to remove excess metal from welded joint and castings? S1M2-124
What is the name of file? S1M2-125
Why chalk is applied on the face of the file? S1M2-126
What is the use of fine pitch hacksaw blades? S1M2-127
Calculate the tap drill size for M10 x 1.25. S1M2-128
What is the name of portion left between flutes in a drill? S1M2-129
What is the reading of vernier bevel protractor? S1M2-130
Which part of outside micrometer ensure a uniform pressure between the measuring surface? S1M2-131
Which part of the vernier height gauge is an intergral part of the main slide? S1M2-132
What is the principle of micrometer? S1M2-133
How the wide range of depth can be measured by depth micrometer? S1M2-134
What is the reading in inch micrometer S1M2-135
Which part of the bevel protractor contact with the inclined surface while measuring? S1M2-136
Which part in drilling machine is to achieve different speed? S1M2-137
What is the part marked as x in pedestal grinder? S1M2-138
What is the name of file? S1M2-139
What happens if the vice handle is over tightened? S1M2-140
Which caliper provide fine adjustment of dimensions? S1M2-141
Which metal cutting saw is used to cut large cross section area? S1M2-142
Why marking tables are made up of cast iron? S1M2-143
What is the name of gauge? S1M2-144
Which file is used for manufacturing of dies and moulds? S1M2-145
What is the method of removing metal chips clogged between the teeth of files? S1M2-146
Which vice is used for holding small work that requires filing or drilling? S1M2-147
Which hacksaw blade is used for cutting along curved lines? S1M2-148
Which chisel is used for cutting keyways? S1M2-149
Name the part marked X in hammer? S1M2-150
What is the purpose of Crowning on the cutting edge of chisel? S1M2-151
How to prevent the tool rubbing against the work surface in metal cutting process? S1M2-152
Name the property of metal that withstand shock or impact? S1M2-153
Which part is the measuring face fitted to the frame of outside micrometer? S1M2-154
What is the name of micrometer? S1M2-155
How the drill chucks are held on the machine spindle? S1M2-156
Which drilling machine, the spindle head is moved towards or away from the column? S1M2-157
Which type of screw threads are rounded at the crest and root? S1M2-158
What is the name of tap wrench? S1M2-159
What is the formula to calculate tap drill size? S1M2-160
Which activity causes excessive wear and chattering of drill bit while drilling? S1M2-161
What is the reading of vernier caliper with inch graduations? S1M2-162
Which part of combination set is used to mark and check angle of $$\rm{90^\circ~and~45^\circ}$$ S1M2-163
Why ribs are provided in the angle plate? S1M2-164
Identify the type of V blocks? S1M2-165
How much carbon content of steel is forgeable? S1M2-166
This website is owned and managed by Arpit Srivastava to assist students in exam preperation. This website consists most often asked questions in different exams. This is no fee to use this website.
English 
हिन्दी