rank-math domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/u561405614/domains/meriiti.com/public_html/wp-includes/functions.php on line 6114updraftplus domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/u561405614/domains/meriiti.com/public_html/wp-includes/functions.php on line 6114
These questions belong to ITI Trade theory which has been asked in various government exams. After solving, Mention your marks in the comment section
For More such questions & Discussions, Join Our Telegram Channel
0 of 54 questions completed
Questions:
To start this test, press the button below (Start Quiz)
After marking the option of each question, press the check button and know the correct answer.
1 mark will be given for every correct answer, there is no negative marking
If you have any doubt in the question or answer, join our Telegram Group (Click)
After finishing the test, definitely tell us the number of correct answers in the comment, by this we will know how we can improve our questions further.
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
0 of 54 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
| Average score |
|
| Your score |
|
What is the name of the fit? S2M2-113
What is the term of the algebraic difference between a size, to its corresponding basic size? S2M2-114
What is the upper limit of the component size S2M2-115
What is the term used for the relationship exists between two mating parts? S2M2-116
What is the least count of vernier micrometer? S2M2-117
What is name of the tool? S2M2-118
How chipped out scraper can be repaired? S2M2-119
Which part of vernier micrometer is marked with vernier scale graduation? S2M2-120
Which instrument is used to measure the effective diameter of screw threads? S2M2-121
What is the name of part marked x in dial gauge? S2M2-122
What is the lower limit of size, if dimension is stated as S2M2-123
What is the name of system if the size of the hole is kept constant, shaft is varied? S2M2-124
What is the algebraic difference between the actual size and its corresponding basic size? S2M2-125
Which device is used in conjunction with dial test indicator? S2M2-126
Which scraper is used to scrape small diameter holes and deburing edges of holes? S2M2-127
Which surface is used for scraping large bearing surface? S2M2-128
What is the difference between maximum limit of size and the minimum limit of size? S2M2-129
Which is grade of tolerance? S2M2-130
What is the maximum limit of size if the basic size of the hole is 25 mm and the deviation is $$\pm0.2mm$$?
What is the name of part marked X? S2M2-132
What is the name of the instrument? S2M2-133
What is the name of fit? S2M2-134
What is the maximum limit of size if size on drawing is $$20^{-0.12}_{-0.21}$$? S2M2-135
Which term indicates the difference between the maximum limit of size and minimum limit of size? S2M2-136
Which type of fit, the tolerance zone of hole is below the tolerance zone of shaft? S2M2-137
Which term indicates the algebraic difference between the actual size and its corresponding basic size? S2M2-138
What is the name of the tool? S2M2-139
What is the name of the part marked X of lever type dial test indicator? S2M2-140
What is marked as X in hole basic system? S2M2-141
What is the expression of 30H7/g6? S2M2-142
What is the lower limit of size in dimension of S2M2-143
What is the type of fit, if the maximum size hole is larger than minimum size of shaft? S2M2-144
What is the name of the part marked X in dial test indicator? S2M2-145
What is the angle of holding the scrapers for soft metal? S2M2-146
What is the marked as X? S2M2-147
What is the upper deviation of the component size S2M2-148
What is the lower limit of size, if dimension is stated as in a drawing? S2M2-149
What is the marked as X? S2M2-150
Which part indicates the reading of dial test indicates? S2M2-151
What is the name of operation? S2M2-152
Which scraper is used to scrape the centre portion of large flat surface? S2M2-153
What is the name of the instrument? S2M2-154
Which instrument is used to magnify small variation in sizes by means of pointer on a graduated dial? S2M2-155
What is the number of fundamental deviation in the BIS system ? S2M2-156
How many fundamental tolerance grades are available? S2M2-157
Which precision instrument is used for comparing and determining the variation in the sizes of the component? S2M2-158
What mechanism is used in the lever type dial test indicator? S2M2-159
Which comparator is used in mass production? S2M2-160
Which gauge used to check internal thread of components S2M2-161
What is the extreme permissible sizes within which the operator is expected to make the component? S2M2-162
What is the size of the component by actual measurement after it is manufactured? S2M2-163
A dimension is stated as $$25\pm0.02~mm$$ in a drawing. What is the tolerance? S2M2-164
How to identify high spots while scraping? S2M2-165
What is the smaller of the two limits of size? S2M2-166
This website is owned and managed by Arpit Srivastava to assist students in exam preperation. This website consists most often asked questions in different exams. This is no fee to use this website.
English 
हिन्दी